diff --git a/garage/Garage_-_Nano_Micro_-_Lichtschranke.ino b/garage/Garage_-_Nano_Micro_-_Lichtschranke.ino
deleted file mode 100644
index d64744f..0000000
--- a/garage/Garage_-_Nano_Micro_-_Lichtschranke.ino
+++ /dev/null
@@ -1,194 +0,0 @@
-#include <SPI.h>
-#include <Ethernet.h>
-
-// Enter a MAC address and IP address for your controller below.
-byte mac[] = {0xA4, 0xDA, 0x49, 0xB8, 0x19, 0xA4};
-IPAddress ip(192, 168, 178, 52);
-EthernetServer server(80);
-
-const int remotePin = 2;
-const int motorPin = 3;
-
-const int ledPin = 5;
-
-const int remoteButton = 6;
-const int motorButton = 7;
-
-const int sensorPin = A0;
-
-const int clickDelay = 500;
-
-void setup() {
-  Serial.begin(9600);
-
-  // Check PINs
-  Serial.print("MISO: ");
-  Serial.println(PIN_SPI_MISO);
-  Serial.print("MOSI: ");
-  Serial.println(PIN_SPI_MOSI);
-  Serial.print("SCK: ");
-  Serial.println(PIN_SPI_SCK);
-  Serial.print("SS: ");
-  Serial.println(PIN_SPI_SS);
-
-  pinMode(remotePin, OUTPUT);
-  pinMode(motorPin, OUTPUT);
-  pinMode(ledPin, OUTPUT);
-  pinMode(remoteButton, INPUT);
-  pinMode(motorButton, INPUT);
-
-  // disable SD card if one in the slot
-  pinMode(4, OUTPUT);
-  digitalWrite(4, HIGH);
-
-  Serial.println("Starting ethernet");
-  Ethernet.begin(mac, ip);
-
-  Serial.println(Ethernet.localIP());
-  
-  Serial.println("init complete");
-}
-
-void loop() {
-  if (digitalRead(remoteButton) == HIGH) {
-    Serial.println("Remote button pressed");
-    triggerRemote();
-  }
-
-  if (digitalRead(motorButton) == HIGH) {
-    Serial.println("Motor button pressed");
-    triggerMotor();
-  }
-
-  // listen for incoming clients
-  EthernetClient client = server.available();
-  if (client) {
-    Serial.println("new client");
-    // an http request ends with a blank line
-    bool currentLineIsBlank = true;
-
-    byte trigger = 0;
-    int sensorValue = 0;
-    char uri[64];
-    byte idx = 0;
-    boolean uriLine = false;
-
-    while (client.connected()) {
-      if (client.available()) {
-        char c = client.read();
-
-        if (currentLineIsBlank && c == 'G') {
-          uriLine = true;
-          uri[idx] = c;
-          idx++;
-        }
-        else if (uriLine) {
-          if (c == '\n') {
-            uriLine = false;
-            uri[idx] = '\0';
-          }
-          else {
-            uri[idx] = c;
-            idx++;
-          }
-        }
-
-        Serial.write(c);
-        // if you've gotten to the end of the line (received a newline
-        // character) and the line is blank, the http request has ended,
-        // so you can send a reply
-        if (c == '\n' && currentLineIsBlank) {
-          // send a standard http response header
-          client.println("HTTP/1.1 200 OK");
-          client.println("Content-Type: text/plain");
-          client.println("Connection: close");  // the connection will be closed after completion of the response
-          client.println();
-          if (uri[4] == '/' && uri[5] == 'r' && uri[6] == ' ') {
-            client.println("trigger remote");
-            trigger = 1;
-          }
-          else if (uri[4] == '/' && uri[5] == 'm' && uri[6] == ' ') {
-            client.println("trigger motor");
-            trigger = 2;
-          }
-          else if (uri[4] == '/' && uri[5] == 'a' && uri[6] == ' ') {
-            client.println("trigger all");
-            trigger = 3;
-          }
-          else if (uri[4] == '/' && uri[5] == 'c' && uri[6] == ' ') {
-            client.println("check sensor");
-            sensorValue = analogRead(sensorPin);
-
-            if (sensorValue > 512) {
-              client.println("true");
-            }
-            else {
-              client.println("false");
-            }
-          }
-          else if (uri[4] == '/' && uri[5] == 'p' && uri[6] == ' ') {
-            client.println("ping");
-          }
-          else {
-            client.println("not found");
-          }
-          break;
-        }
-        if (c == '\n') {
-          // you're starting a new line
-          currentLineIsBlank = true;
-        } else if (c != '\r') {
-          // you've gotten a character on the current line
-          currentLineIsBlank = false;
-        }
-      }
-    }
-    // give the web browser time to receive the data
-    delay(1);
-    // close the connection:
-    client.stop();
-    Serial.println("client disconnected");
-
-    if (trigger == 1) {
-      triggerRemote();
-    }
-    else if (trigger == 2) {
-      triggerMotor();
-    }
-    else if (trigger == 3) {
-      triggerAll();
-    }
-
-    trigger = 0;
-  }
-  
-}
-
-void triggerRemote() {
-  Serial.println("triggerRemote");
-  digitalWrite(remotePin, HIGH);
-  digitalWrite(ledPin, HIGH);
-  delay(clickDelay);
-  digitalWrite(remotePin, LOW);
-  digitalWrite(ledPin, LOW);
-}
-
-void triggerMotor() {
-  Serial.println("triggerMotor");
-  digitalWrite(motorPin, HIGH);
-  digitalWrite(ledPin, HIGH);
-  delay(clickDelay);
-  digitalWrite(motorPin, LOW);
-  digitalWrite(ledPin, LOW);
-}
-
-void triggerAll() {
-  Serial.println("triggerAll");
-  digitalWrite(remotePin, HIGH);
-  digitalWrite(motorPin, HIGH);
-  digitalWrite(ledPin, HIGH);
-  delay(clickDelay);
-  digitalWrite(remotePin, LOW);
-  digitalWrite(motorPin, LOW);
-  digitalWrite(ledPin, LOW);
-}