Update bash_history-42-neu

documentation/audiorakete/bash_history-42-neu

@@ -1,3 +1,4 @@
+Kabel zu Buck converter durch JBL *und* Base fädeln
 SD-Karte vorher einlegen
 
 
@@ -20,27 +21,22 @@ sudo pip3.6 install socketio-client
 sudo pip3.6 install RPi.GPIO
 python3.6 /data/INTERNAL/audiorakete/test/lighton.py 
 python3.6 /data/INTERNAL/audiorakete/test/lightoff.py 
-python3.6 /data/INTERNAL/audiorakete/test/lighton.py 
-python3.6 /data/INTERNAL/audiorakete/test/lightoff.py 
 python3.6 /data/INTERNAL/audiorakete/test/buttons.py 
 python3.6 /data/INTERNAL/audiorakete/test/sensor_tcst2103.py 
 python3.6 /data/INTERNAL/audiorakete/test/lighton.py 
 fswebcam -d /dev/video0 -v webcam-test.jpg
 python3.6 /data/INTERNAL/audiorakete/test/lightoff.py 
-fswebcam -d /dev/video0 -v webcam-test.jpg
+
 python3.6 /data/INTERNAL/audiorakete/test/lighton.py 
-fswebcam -d /dev/video0 -v webcam-test.jpg
-sudo shutdown -h now
-python3.6 /data/INTERNAL/audiorakete/test/lighton.py 
-fswebcam -d /dev/video0 -v webcam-test.jpg
 zbarcam --quiet --nodisplay --raw -Sdisable -Sqrcode.enable /dev/video0
 
 sudo /opt/vc/bin/vcgencmd get_throttled
 sudo /opt/vc/bin/tvservice -o
 sudo nano /etc/rc.local 
-# /opt/vc/bin/tvservice -o --> rc.local
+  /opt/vc/bin/tvservice -o --> rc.local
 
 # disable PWR led in /boot/config.txt
+nano /boot/config.txt 
   # Disable the PWR LED
   dtparam=pwr_led_trigger=none
   dtparam=pwr_led_activelow=off
@@ -49,7 +45,6 @@ sudo nano /etc/rc.local
   #dtparam=act_led_trigger=none
   #dtparam=act_led_activelow=off
 
-nano /boot/config.txt 
 sudo nano /lib/systemd/system/audiorakete.service
 sudo systemctl daemon-reload
 sudo systemctl enable qudio.service