s2

code/test/ir_test.py

@@ -0,0 +1,27 @@
+import RPi.GPIO as GPIO
+import time
+
+# photo sensor on PIN 4
+GPIO.setmode(GPIO.BCM)
+GPIO.setup(4, GPIO.IN)
+
+# LED on PIN 17
+GPIO.setup(17, GPIO.OUT)
+GPIO.output(17, GPIO.LOW)
+
+try:
+    print('Start IR test')
+    
+    while True:
+        time.sleep(0.25)
+        if (GPIO.input(4) == GPIO.LOW):
+            print('LED OFF')
+            GPIO.output(17, GPIO.LOW)
+        else:
+            print('LED ON')
+            GPIO.output(17, GPIO.HIGH)
+
+except KeyboardInterrupt:
+    print('bye')
+    GPIO.cleanup()
+

code/test/lightoff.py

@@ -0,0 +1,9 @@
+import RPi.GPIO as GPIO
+import time
+
+GPIO.setmode(GPIO.BOARD)
+
+GPIO.setup(11,GPIO.OUT)
+GPIO.output(11,GPIO.LOW)
+
+GPIO.cleanup()

code/test/lighton.py

@@ -0,0 +1,8 @@
+import RPi.GPIO as GPIO
+import time
+
+GPIO.setmode(GPIO.BOARD)
+
+GPIO.setup(11,GPIO.OUT)
+GPIO.output(11,GPIO.HIGH)
+

installation.txt

@@ -42,7 +42,7 @@ sudo nano /etc/ntp.conf
 sudo /etc/init.d/ntp restart
 date
 
-sudo apt install mc moc
+sudo apt install lirc zbar-tools mc moc python3 python-rpi.gpio python3-rpi.gpio
 
 # PHAT DAC (https://learn.pimoroni.com/tutorial/phat/raspberry-pi-phat-dac-install)
 curl -sS get.pimoroni.com/phatdac | bash
@@ -65,7 +65,6 @@ sudo nano /etc/modprobe.d/alsa-base.conf
 
 
 
-
 -- HERE BE DRAGONS ------------------------------------------------------------
 
 

notes.md

@@ -12,4 +12,5 @@
 
 ## Gehäuse
 - Schraublöcher für Raspi am Sockel
-- Buttons per Acryl-Transfer beschriften?
+- Buttons per Acryl-Transfer beschriften?
+- Aussparung Indexpunkt Basis vorn